rubberstore.com background image

AS004-70NE Neoprene Oring (AS568-004 Size 0.070 CS x 0.070 ID)
Model: AS004-70NE
Minimum order: 25
Stock: 0
*Please allow up to 2 weeks for orders greater than available stock.

Quantity1+100+ 500+ 1000+ 
Price for each$0.46$0.12$0.08$0.05
Your savings- 74%83%89%
 
Quantity:
AS004-70NE Neoprene Oring (AS568-004 Size 0.070 CS  x 0.070 ID)
Click to enlarge
AS004-70NE Neoprene / Chloroprene O-Ring AS568-004

Neoprene also known as choloprene is a widely used elastomer in the o-ring and seal industry due its to overall properties ratings and its relatively low cost. Neoprene exhibits both moderate resistance to petroleum oils as well as weather elements such as, UV and oxygen. This allows neoprene o-rings and seals to preform exceedingly well in applications where many other elastomers would not be satisfactory. Neoprene is a general purpose elastomer which exhibits low compression set, good resilience, and is both flex and cracking resistant. Finally, neoprene has excellent resistances to both ammonia and Freon, making it prime choice of elastomers in the refrigeration and heating and air industries.

The neoprene AS004-70NE o-ring can be reference in one of four ways:

  • Mostly commonly, the industry standard AS568 “dash” number: (AS568-004)
  • Standard dimensions: (CS 0.070" x ID 0.070")
  • Metric dimensions: (CS 1.78 x ID 1.78)
  • Nominal fractional dimensions: (CS 1/16 " x ID 5/64")

The final consideration for an o-ring after size and material type is the durometer. Durometer is an industry standard measurement for a material’s hardness. Most often for rubber seals, durometer is measured and listed in accordance with the “Shore A” scale. Typical durometers for standard rubber seals are 70, 75 and 90, depending on the material. A higher number indicates a harder material. Durometer is also generally stated and accepted with a “+/- 5” tolerance. For neoprene o-rings, the standard nominal durometer is 70.

Primary Uses:

O-Rings, rubber seals and custom molded rubber components for:

  • refrigeration industry applications
  • automotive industry applications
  • general industrial use
  • Model Number: AS004-70NE
  • Manufacturers Part Number: AS004-70NE
  • Industry Standard Reference Number: AS568-004
  • Material Type: Neoprene / Chloroprene / CR
  • Durometer (ShoreA): 70
Temperatures Range (Dry Heat)
Low: High:
-40`F / -40`C 250`F / 121`C
Neoprene O-Ring AS568-004 Application Ratings
Properties Excellent Good Fair Poor
Oils & Grease  
Neoprene has good oil and grease resistance
   
Tear Strength  
Neoprene o-rings exibit good tear strength ratings
   
Fuel Resistance      
Neoprene o-rings should not be used with fuels
Refrgerants Ammonia / Freon
Neoprene has excellent resistance to refrigerants like ammonia and freon
     
Compression    
Neoprene rubber has a fair compression set
 
Abrasion Resistance  
neoprene rubber exhibits good abrasion resistance
   
Neoprene O-Ring AS568-004 Dimensions CS x ID

AS568-004 (Durometer 70) cross reference sizes

  • Nominal Fraction: 1/16 x 5/64
  • Actual Size: 0.070 x 0.070
  • Metric Size Millimeters: 1.78 x 1.78
Quantity:
Add AS004-70NE Neoprene Oring (AS568-004 Size 0.070 CS  x 0.070 ID) to Facebook Add AS004-70NE Neoprene Oring (AS568-004 Size 0.070 CS  x 0.070 ID) to Reddit Add AS004-70NE Neoprene Oring (AS568-004 Size 0.070 CS  x 0.070 ID) to Twitter Add AS004-70NE Neoprene Oring (AS568-004 Size 0.070 CS  x 0.070 ID) to Yahoo myWeb Add AS004-70NE Neoprene Oring (AS568-004 Size 0.070 CS  x 0.070 ID) to Stumbleupon


Currently viewing: AS004-70NE | AS568-004 Neoprene O-ring 70 Durometer (Chloroprene)
Product Search

Product Search
Search by Design Criteria

Part Number Search


Search By Part Number