Material Type EPDM BT-1140 Convoluted Bellow
Ethylene-propylene compounds are prepared from ethylene and propylene (EPM) and usually a third monomer (EPDM). These compounds are used frequently to seal in brake systems, and for sealing hot water and steam. Ethylene propylene compounds have good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. They are not recommended for applications with petroleum oils, mineral oil, di-ester lubricants, or fuel exposure. Ethylene Propylene has gained wide seal industry acceptance for its excellent ozone and chemical resistance properties and is compatible with many polar fluids that adversely affect other elastomers. EPDM compounds are typically developed with a sulfur or peroxide cure system. Peroxide-cured compounds are suitable for higher temperature exposure and typically have improved compression set performance.	Temperature Range (dry heat)
	low	high
	- 60F - 51C	300F 149C
	Application Advantages
	excellent weather resistance good low temperature flexibility excellent chemical resistance good heat resistance
	Bellow Details
	Metric (mm)	Standard (inches)
Primary Uses
Bellows and convoluted rubber dust boots are versatile seals used in a wide range of applications to seal dust and other environmental elements in applications with a stroke or designed range of motion. Ozone exposure applications General industrial use	Length Max: 17 Length Min: 5.6 ID Min: 3.71 OD Max: 19.81 Connector 1 ID: 3.71 Connector 2 ID: 12.45	Length Max: 0.67 Length Min: 0.22 ID Min: 0.15 OD Max: 0.78 Connector 1 ID: 0.15 Connector 2 ID: 0.49
Manufactures Part Numbers: BT-1140 , BT-3710