background image

AS024-E70-8172 EPDM NSF 61 Oring (AS568-024 Size 0.070 CS x 1.114 ID)
Model: AS024-E70-8172
Minimum order: 25
Stock: 46000
*Please allow up to 2 weeks for orders greater than available stock.

Quantity1+100+ 500+ 1000+ 
Price for each$0.72$0.35$0.28$0.26
Your savings- 51%61%64%
AS024-E70-8172 EPDM NSF 61 Oring (AS568-024 Size 0.070 CS  x 1.114 ID)
Click to enlarge
AS024-E70-8172 EPDM NSF 61 O-Ring AS568-024

Ethylene-propylene diene (EPD) is usually compounded with a third monomer to produce what is most commonly referred to as EPDM rubber. EPDM o-rings are frequently used to seal brake systems and in many hot water and steam applications. Additionally, EPDM compounds have good resistances to; mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM has gained wide acceptance in the o-ring and rubber seal industry due to these excellent chemical resistance properties and its superior ozone resistance. In applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended. EPDM is sometimes referred to by the following trade names; EP, EPT or EPR.

The NSF 61-Standard is used to establish minimum requirements for the control of potentially harmful contaminants leaching into drinking water as a result of water interacting with the faucet components. Rubber compounds submitted to the NSF go through rigorous testing to determine if these standards are met. For more information on this standard refer to the NSF web site.

The EPDM NSF 61 AS024-E70-8172 o-ring can be reference in one of four ways:

  • Mostly commonly, the industry standard AS568 “dash” number: (AS568-024)
  • Standard dimensions: (CS 0.070" x ID 1.114")
  • Metric dimensions: (CS 1.78 x ID 28.30)
  • Nominal fractional dimensions: (CS 1/16 " x ID 1 1/8")

The final consideration for an o-ring after size and material type is the durometer. Durometer is an industry standard measurement for a material’s hardness. Most often for rubber seals, durometer is measured and listed in accordance with the “Shore A” scale. Typical durometers for standard rubber seals are 70, 75 and 90, depending on the material. A higher number indicates a harder material. Durometer is also generally stated and accepted with a “+/- 5” tolerance. For EPDM o-rings, the standard nominal durometer is 70.

Primary Uses:

O-Rings, rubber seals and custom molded rubber components for:

  • water systems, seals, faucets, general plumbing
  • brake systems
  • ozone exposure applications
  • automotive cooling systems
  • general industry use
  • Model Number: AS024-E70-8172
  • Manufacturers Part Number: AS024-E70-8172
  • Industry Standard Reference Number: AS568-024
  • Durometer (ShoreA): 70
  • Material Specification: NSF 61
Temperatures Range (Dry Heat)
Low: High:
-60`F / -51`C 300`F / 149`C
EPDM O-Ring NSF 61 AS568-024 Application Ratings
Properties Excellent Good Fair Poor
Petroleum Oils / Fuels      
EPDM o-rings have poor resistance to fuels and petroleum oils
Tear Strength  
EPDM o-rings exhibit good tear strength
Steam Up to 399`F
EPDM material exhibits excellent steam resistance
Gas Impermeability  
EPDM o-rings are rated good with gas impermeability
EPDM has a good compression set
Abrasion Resistance  
EPDM has good abrassion resistance
EPDM NSF 61 O-Ring AS568-024 Dimensions CS x ID

AS568-024 (Durometer 70) cross reference sizes

  • Nominal Fraction: 1/16 x 1 1/8
  • Actual Size: 0.070 x 1.114
  • Metric Size Millimeters: 1.78 x 28.30
Add AS024-E70-8172 EPDM NSF 61 Oring (AS568-024 Size 0.070 CS  x 1.114 ID) to Facebook Add AS024-E70-8172 EPDM NSF 61 Oring (AS568-024 Size 0.070 CS  x 1.114 ID) to Reddit Add AS024-E70-8172 EPDM NSF 61 Oring (AS568-024 Size 0.070 CS  x 1.114 ID) to Twitter Add AS024-E70-8172 EPDM NSF 61 Oring (AS568-024 Size 0.070 CS  x 1.114 ID) to Stumbleupon

Currently viewing: AS024-E70-8172 | AS568-024 EPDM NSF 61 O-ring 70 Durometer (EPR)
Product Search

Product Search
Search by Design Criteria

Part Number Search

Search By Part Number