rubberstore.com background image

AS036-70EP EPDM Oring (AS568-036 Size 0.070 CS x 2.364 ID)
Model: AS036-70EP
Minimum order: 25
Stock: 150
*Please allow up to 2 weeks for orders greater than available stock.

Quantity1+100+ 500+ 1000+ 
Price for each$0.60$0.21$0.18$0.17
Your savings- 65%70%72%
 
Quantity:
AS036-70EP EPDM Oring (AS568-036 Size 0.070 CS  x 2.364 ID)
Click to enlarge
AS036-70EP EPDM O-Ring AS568-036

Ethylene-propylene diene (EPD) is usually compounded with a third monomer to produce what is most commonly referred to as EPDM rubber. EPDM o-rings are frequently used to seal brake systems and in many hot water and steam applications. Additionally, EPDM compounds have good resistances to; mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM has gained wide acceptance in the o-ring and rubber seal industry due to these excellent chemical resistance properties and its superior ozone resistance. In applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended. EPDM is sometimes referred to by the following trade names; EP, EPT or EPR.

The EPDM AS036-70EP o-ring can be reference in one of four ways:

  • Mostly commonly, the industry standard AS568 “dash” number: (AS568-036)
  • Standard dimensions: (CS 0.070" x ID 2.364")
  • Metric dimensions: (CS 1.78 x ID 60.05)
  • Nominal fractional dimensions: (CS 1/16 " x ID 2 3/8")

The final consideration for an o-ring after size and material type is the durometer. Durometer is an industry standard measurement for a material’s hardness. Most often for rubber seals, durometer is measured and listed in accordance with the “Shore A” scale. Typical durometers for standard rubber seals are 70, 75 and 90, depending on the material. A higher number indicates a harder material. Durometer is also generally stated and accepted with a “+/- 5” tolerance. For EPDM o-rings, the standard nominal durometer is 70.

Primary Uses:

O-Rings, rubber seals and custom molded rubber components for:

  • water systems, seals, faucets, general plumbing
  • brake systems
  • ozone exposure applications
  • automotive cooling systems
  • general industry use
  • Model Number: AS036-70EP
  • Manufacturers Part Number: AS036-70EP
  • Industry Standard Reference Number: AS568-036
  • Durometer (ShoreA): 70
Temperatures Range (Dry Heat)
Low: High:
-60`F / -51`C 300`F / 149`C
EPDM O-Ring AS568-036 Application Ratings
Properties Excellent Good Fair Poor
Petroleum Oils / Fuels      
EPDM o-rings have poor resistance to fuels and petroleum oils
Tear Strength  
EPDM o-rings exhibit good tear strength
   
Steam Up to 399`F
EPDM material exhibits excellent steam resistance
     
Gas Impermeability  
EPDM o-rings are rated good with gas impermeability
   
Compression  
EPDM has a good compression set
   
Abrasion Resistance  
EPDM has good abrassion resistance
   
EPDM O-Ring AS568-036 Dimensions CS x ID

AS568-036 (Durometer 70) cross reference sizes

  • Nominal Fraction: 1/16 x 2 3/8
  • Actual Size: 0.070 x 2.364
  • Metric Size Millimeters: 1.78 x 60.05
Quantity:
Add AS036-70EP EPDM Oring (AS568-036 Size 0.070 CS  x 2.364 ID) to Facebook Add AS036-70EP EPDM Oring (AS568-036 Size 0.070 CS  x 2.364 ID) to Reddit Add AS036-70EP EPDM Oring (AS568-036 Size 0.070 CS  x 2.364 ID) to Twitter Add AS036-70EP EPDM Oring (AS568-036 Size 0.070 CS  x 2.364 ID) to Stumbleupon


Customers who bought this product also purchased
AS012-70EP EPDM Oring (AS568-012 Size 0.070 CS  x 0.364 ID)
AS012-70EP EPDM Oring (AS568-012 Size 0.070 CS x 0.364 ID)
Currently viewing: AS036-70EP | AS568-036 EPDM O-ring 70 Durometer (EP / EPR / EPT)
Product Search

Product Search
Search by Design Criteria

Part Number Search


Search By Part Number